Electronic Dice Project


Circuit Diagram :-



Comments

Post a Comment

Popular posts from this blog

Smart Blind stick Code

Code int trigpin = 4; int echopin = 5; int buzzer= 3; long duration; int distance; void setup() {   pinMode(3,OUTPUT);   pinMode(trigpin, OUTPUT);   pinMode(echopin, INPUT);    } void loop() {   digitalWrite(trigpin, LOW);   delayMicroseconds(2);   digitalWrite(trigpin, HIGH);   delayMicroseconds(10);   digitalWrite(trigpin, LOW);      duration = pulseIn(echopin, HIGH);   distance = duration*0.034/2;   Serial.print("Distance: ");   Serial.println(distance);      if(distance<30)   {     digitalWrite(3, HIGH);   }   else   {     digitalWrite(3, LOW);   } }
Read more

Arduino Interfacing With Ultrasonic Sensor (HC-SR04)

Image
Circuit Diagram :- Code:- const int trigPin = 4; const int echoPin = 5; long duration; int distance; void setup() {   pinMode(trigPin, OUTPUT);   pinMode(echoPin, INPUT);   Serial.begin(9600);    } void loop() {   digitalWrite(trigPin,LOW);   delayMicroseconds(1);   digitalWrite(trigPin,HIGH);   delayMicroseconds(20);   digitalWrite(trigPin,LOW);     // Reads the echopin, returns the sound wave travel time in microseconds  duration = pulseIn(echoPin,HIGH);  // Calculation of distance  distance = duration*0.034/2; //prints the distance on serial Monitor  Serial.print("Distance:"); Serial.println(distance); delay(500); }  
Read more